Yada Backup Camera Specifikace

with 5” Dash MonitorBT54860

86. Locate the closest available 12/24V socket and plug in the adapter. 7. Standing with the license plate in one hand and the Camera in the other h

9PowerParking Aid Line / EnterUpMenuDownPOWER ON/OFF• The Dash Monitor will automatically turn ON when it is connected to a power source. • Hold the

10BRIGHTNESS AND CONTRAST You can adjust the contrast and brightness of the Monitor according to your desired level. Note: Contrast and Brightness set

11PAIRINGThe Yada Backup Camera included is already paired with the monitor. If you can not see the Camera image, pair the Camera with the following s

12WARNING: A failure to read and follow these warnings and instructions may result in a serious accident, including damaged property or a serious inj

13• Do not strike the Camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a re or an electric shock.•

14CLEANING• If dirt, rain or snow attaches to the Camera, the monitor may not clearly display objects. If water droplets, snow or mud adhere to the

15defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, Winplus North America’s liability shall

16 NOTE: Toll Free # is for North America Customers ONLY. See Customer service section for customer contact numbers for other regions/oces. For

17any liability for any losses (whether direct or indirect, in contract, tort or otherwise) incurred in connection with the Backup Camera, including b

TABLE OF CONTENTS1. Introduction ...

18preferably in the original shipping box, and freight and insurance prepaid to the following address: ATTN: WINPLUS BLUETOOTH PRODUCTS RETURNS Unit

19CUSTOMER SERVICE/CONTACT For questions or issues regarding the product, please visit www.letsyada.com or contact Winplus in your area/region to spea

20• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on

21IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

ML-54860_V1www.winplus.com www.letsyada.com© 2014 Winplus North America Inc. All Rights Reserved. Winplus, the logo design, and Yada® aretrademarks or

1Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty.

21. 5” Dash Monitor2. 1 Backup Camera3. 12V/24V Power Adapter for Monitor4. Hardwire Cable for Monitor5. Suction Cup Mount for Monitor6. Install

31. Frequency: 2.4GHz2. Operating Voltage: DC 12V / 24V3. Operating Temperature: -10~+50°C4. Maximum Signal Range: 30 feet/10Metres (without Inter

4BACKUP CAMERA INSTALLATION - Hardwire PowerThis installation is based on powering the Camera over the reverse tail lights. When installed as directe

55. At your taillight, remove the light bulb socket from the reverse light housing.6. Determine the reverse light power wires for your car, designat

616. Once license plate and Camera are secure, you can adjust the vertical angle of the Camera to your specic need. 17. As a last check, note the p

7BACKUP CAMERA INSTALLATION – 12/24V Direct PowerThis installation allows the Camera to be powered via an adapter into any available 12/24V socket. W